Cost of 10x10 Paver Patio: What You Pay in Jupiter, FL
The cost of 10x10 paver patio installation is what you pay to turn 100 square feet of ground into an interlocking paver surface. That price covers excavation, a compacted gravel base, bedding sand, the pavers, edging, and labor. Most professionally installed 10x10 patios land between $1,500 and $3,500 , which works out to $15 to $35 per square foot. A 12x12 patio, at 144 square feet, runs roughly $2,100 to $5,000 at the same rates.
Those ranges are wide because the pavers themselves are only part of the bill. Soil, drainage, pattern, access and the crew's fixed costs all change the total. In a coastal market like Jupiter, sandy soil and local labor rates tend to push quotes toward the upper half of any published range.
This article shows you how the price is built, how to estimate your own budget, and how to read a contractor's quote. Integrity Landscape builds paver patios in Jupiter and surrounding Palm Beach County.
Why the cost of a 10x10 paver patio varies so much
A 10x10 paver patio varies in price because the work under the pavers and the fixed costs of a small job matter more than the 100 square feet you see. Two patios of the same size can differ by $2,000 or more.
Typical prices by patio size
The table applies three per-square-foot rates to common sizes. Published pricing guides generally quote anywhere from about $10 to $35 per square foot. For a small patio in a high-cost coastal market, $15 to $35 is the more realistic planning band.
| Patio size | Area | Low ($15/sq ft) | Mid ($25/sq ft) | High ($35/sq ft) |
|---|---|---|---|---|
| 10x10 | 100 sq ft | $1,500 | $2,500 | $3,500 |
| 12x12 | 144 sq ft | $2,160 | $3,600 | $5,040 |
| 12x16 | 192 sq ft | $2,880 | $4,800 | $6,720 |
| 16x16 | 256 sq ft | $3,840 | $6,400 | $8,960 |
| 20x20 | 400 sq ft | $6,000 | $10,000 | $14,000 |
Use this table as a budgeting range , not a quote. It also answers the question of what a 400 square foot paver patio costs: roughly $6,000 to $14,000.
Why small patios cost more per square foot
Small patios cost more per square foot because several costs stay the same no matter how big the patio is. Delivery of base rock and pavers, equipment hauling, layout, and a minimum crew day all apply to 100 square feet just as they do to 400.
That is why a 10x10 often prices at $20 or more per square foot while a large patio with the same pavers comes in lower. A 12x12 costs only about 44% more than a 10x10 because its area is 44% larger (144 versus 100 square feet), not because the job is twice the work.
Small patios cost more per square foot, so price the whole job, not just the pavers.
How to estimate your 10x10 or 12x12 patio budget
You can estimate your budget by multiplying patio area by an installed per-square-foot rate, then adding extras and a cushion. The math takes five minutes and gives you a number to hold quotes against.
A simple budget formula
- Multiply length by width. A 10x10 is 100 square feet, a 12x12 is 144.
- Pick an installed rate that matches your paver: $15 to $25 for standard concrete pavers is a sensible start.
- Multiply area by rate.
- Add extras such as removing sod, moving sprinkler heads, steps, or a border.
- Add a 10% contingency for surprises under the surface.
For a 10x10 at $20 per square foot, that is $2,000 plus $200 contingency, or $2,200. For a 12x12 at the same rate, it is $2,880 plus $288, or about $3,170. Contractors price on installed area, so do not add a waste allowance to this number. Waste only matters if you buy materials yourself, where you should order 5% to 10% extra for cuts.
What gets dug and hauled
Excavation is the hidden line in most quotes, and you can calculate it. A paver patio needs about 4 to 6 inches of compacted base, 1 inch of bedding sand, and the paver thickness, which is often around 2 3/8 inches for common sizes.
For 100 square feet, that is about 7.4 to 9.4 inches of digging. That means 2.3 to 2.9 cubic yards of soil to remove. You will also need roughly 1.2 to 1.9 cubic yards of base rock and 0.3 cubic yards of sand. If a quote shows no line for removal and base, ask why.
Multiply area by an installed rate, add extras, then keep 10% in reserve.
What materials and labor add to a paver patio price
Materials and labor split the bill, and labor is often the larger half. The paver you choose sets the materials side, while base work and installation set the labor side.
Paver material tiers
The table shows planning ranges for installed cost by material, with the matching total for a 10x10.
| Paver material | Installed cost per sq ft | 10x10 total |
|---|---|---|
| Concrete interlocking pavers | $15 to $25 | $1,500 to $2,500 |
| Brick pavers | $20 to $30 | $2,000 to $3,000 |
| Travertine or natural stone | $30 to $45 | $3,000 to $4,500 |
Concrete pavers are the budget option and come in many colors and textures. Travertine costs more but is popular around Florida pools because it stays comfortable underfoot in the sun. Integrity Landscape's Patios & Pathways service covers interlocking pavers, travertine and natural stone.
Labor and site prep
Labor pays for the work you never see afterward. The crew excavates, hauls off soil, sets and compacts the base with a plate compactor, screeds the sand, lays the pavers, cuts edges, installs edge restraints, and sweeps in polymeric sand.
Many guides put labor near half of the total. The base is where cheap jobs fail, because an under-compacted base settles and the surface goes wavy within a few seasons. A low quote often cuts here.
Labor and base prep are about half your cost, so never pay less for a thinner base.
What raises or lowers a Jupiter patio quote
Site conditions and design choices move a patio quote more than the paver brand does. Knowing which ones apply to your yard lets you predict the high or low end of the range.
Site factors
Sandy South Florida soil drains well but shifts, so it needs a properly compacted base and solid edge restraint. Drainage matters too, since heavy summer rain should run away from the house, not pool on the patio.
Other site factors that add cost:
- Sprinkler lines or heads that need rerouting
- Existing sod, roots or old concrete to remove
- Tight access that forces hand-carrying material instead of using a skid steer
- Slopes that need grading or a small retaining edge
Design factors
Straight runs in a running-bond pattern are the cheapest to lay. Herringbone patterns, curves, circles, and inlaid borders all increase cuts and labor. A 10-foot circular patio costs more per square foot than a square one for this reason.
Add-ons such as steps, seat walls, lighting, or a fire pit pad are priced separately. If your patio sits beside a pool, ask about slip resistance and heat of the surface before choosing a color.
Soil, drainage, and pattern change the price more than the paver brand does.
How to judge a paver patio quote
A good quote is itemized, written, and specific about base depth, paver type, and what happens to the removed soil. You can compare any two bids once you know which lines to look for.
Quote checklist
- Area and dimensions stated in square feet
- Paver brand, size, and color named
- Base depth and material , such as 4 to 6 inches of compacted crushed rock
- Excavation and haul-off included or listed
- Edge restraint and polymeric sand listed
- Warranty terms and who handles repairs
- License and insurance proof
Ask whether a project manager will be on site. Integrity Landscape is licensed and insured, gives same-day quotes and next-day service, and assigns a dedicated project manager to every job.
DIY, kits, and concrete
DIY saves labor, which is the biggest share, but you need a plate compactor and a full day of base work for even 100 square feet. Pallet kits sold for a 10x10 cover the pavers only, not the base, sand or edging. Poured concrete usually costs less upfront than pavers, while pavers are easier to repair and replace section by section.
A good quote names the base depth, the paver and the haul-off.
Set your budget, then get a written quote
The cost of a 10x10 paver patio is about $1,500 to $3,500 for standard materials, with 12x12 patios starting near $2,100. Small jobs cost more per square foot, and the base, labor and site conditions drive the total more than the pavers do. Premium stone like travertine moves you above that range.
Run the formula, add a 10% cushion, and compare quotes line by line. If you want a firm number for your yard, you can request a free estimate from Integrity Landscape and get a written quote for your patio in Jupiter or nearby Palm Beach County.

